Hot Rod Forum banner

walknig foot for a phaff1425/26

4K views 3 replies 2 participants last post by  DanTwoLakes 
#1 ·
all this time i have been using a rather old phaff sewing machine and i only have a welt foot for it. I think is about time that I pony up and get the right tool for the job. is their any place online i can find parts for this

model number is a phaff 1426
 
#2 · (Edited)
You can use a 1/4" welt foot to sew flat seams, that's what's on my sewing machine 95% of the time. I almost never use a plain presser foot.

Are you sure your model # is Pfaff 1425? The 1425 is a newer expensive machine, and has been discontinued, so parts may be scarce for it. Could it be a 1245?

If so, CLICK HERE

BTW, a 1246 or a 1426 is a double needle machine, not a single needle machine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top