|06-24-2011 09:38 AM|
You will also need a residual pressure valve for the rear axle drum brakes. A 10lb unit can be installed inline.
|06-21-2011 07:58 PM|
|1930u||Thanks guy's. I am using a proportioning valve.|
|06-20-2011 05:20 AM|
|Irelands child||You do not need the residual valves but will probably need a proportioning valve and possibly a hold off valve to balance the brake application pressures. Speedway, Summit, Jegs have both (who said this was simple )|
|06-19-2011 10:32 PM|
|evolvo||No you don't|
|06-19-2011 07:30 PM|
Do I need residual pressure valves?
To all- My Corvette style master cylinder is mounted at a right angle behind the dash. I'm using 1969 Chevy single piston front calipers and 57-64 Olds rear drum brakes. The master cylinder is mounted 24"-30" higher than the calipers and wheel cylinders. Do I need to use residual pressure valves?