|07-22-2011 12:04 PM|
This is as near as I could get, no Vortecs or Airgap listed in the programme.
Large version, click here.
Let me know if anything needs tweaking.
Pretty similar to mine.
|07-22-2011 09:05 AM|
|07-19-2011 08:01 PM|
|454C10||i would say around 350hp|
|07-19-2011 04:03 PM|
can I get a dynosim?
I've searched for some dynosims similar to mine, but none exact. tech, if you don't mind to run one for me here are my specs:
4.060 x 3.48
stock (except springs) vortec 906 casting heads. 1.94/1.5 64cc
rockers: 1.6 roller tip
pistons: flat top hypers, 4 VR, -5cc (I think) 1.560 height, .025 clearance
head gaskets: felpro 7733PT2, .039 comp thick
intake: RPM Air gap
carb: holley 750 dp
cam: Crane 10005, flat hyd, specs: http://www.cranecams.com/product/car...detail&p=23943 1.6 rocker ratio
headers: 1 5/8 shorty (sticking with shorties for now, its going in a 3rd gen camaro and I can use my stock y-pipe, etc.)
fuel: 91 oct unleaded
if I'm forgetting anything let me know. thanks!!