|08-07-2011 02:16 AM|
I am using almost all ACL now. Never liked King as they had a high stress de-lamination issue (quality controll?) a few years back.
Federal Mogul, if you like aluminum bearings. A lot of Fed-Mog is re-boxed from someone else. Later Clevite quality was suffering, up till Mahle bought the rights and started making them. I try to find production dates from pre 1990. Have also used Mahle bearings. Excellent.
|08-06-2011 02:19 PM|
|johnsongrass1||Me and my builder both use ACL.|
|08-06-2011 02:06 PM|
|ericnova72||King Alecular, all the way. Or Federal Mogul Performance bearings. I don't use Clevite anymore, they have fallen behind in the technology race.|
|08-06-2011 12:55 PM|
|08-06-2011 12:40 PM|
|lmsport||Clevite77 for everything, all the time. Use coated bearing if you want a little more durability and tolerance of abuse.|
|08-06-2011 12:39 PM|
|GMC boogie||Clevite or Federal Mogul here.|
|08-06-2011 11:26 AM|
Don't know about everyone but i still use the Clevite bearings.
|08-06-2011 11:21 AM|
So I am putting this 355 together and most of all want it to last. Its been a while since I have done this. Performance wise, I always used Clevite bearings for rods and mains. Whats the trick setup now? I see Summit has some competition bearings, Durashield, with some kind of trick coating on them. Whos using what?