Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Suspension - Brakes - Steering> Soft/Low Brake Pedal
User Name
lost password?   |   register now

Thread: Soft/Low Brake Pedal Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
09-01-2011 08:05 PM
Cape Cod Bob go to this site. Very helpful. Get their catalog. Loaded with info on how to. Even call for tech advice.
09-01-2011 07:59 PM
MidnightFord Learned something today. The port closest to the push rod is for the front brakes, correct?
That being the case, I only have the front brakes hooked up now and the pedal goes to the floor. Any ideas? The brakes are mounted below the cab. Years ago I put a 10# residual on what I thought was the rear brake line but is actually the fronts. It is still on there and there is no change in performance. Pedal still gets real low to floor.
08-31-2011 11:13 PM
solidaxel Considering how tight the rear shoes are on the drum there should not be much movement of the wheel cylinder, so with no resistance, soft rubber line, all of that movement could be in the rubber hose , and not expanding the shoes in the drum
08-31-2011 11:00 PM
Soft/Low Brake Pedal

I have a 56' ford f100 with power brakes. Always felt that the break were not right as the pedal always got really low to the floor. This past month, the master cylinder began leaking. Replaced it with a new one, which was a 1" bore master cylinder from a 79-81 Buick Riviera.
After bench bleeding and installing, vacuum bled the lines, the pedal could be pushed to the floor with my hand without the engine running.
First I thought the new master cylinder might be bad. To test it out I removed the rear brake line and plugged it. When I did so, I tried pressing on the brake pedal and there was almost not movement.
This has me thinking that there is something going on with the rear brakes. I have a 10lb residual in the line. I was also asked by the auto parts store if it was rear drums or disks so I got the mc for the drums.
I believe the drums brakes are adjusted properly as I can hear the pads drag on the drums and it is difficult to rotate the rear tires by hand.
Only thing I can think is that the rear flex line is ballooning, but would that cause such a drop in the pedal?
Any help or other ideas would be appreciated.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 02:24 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.