|10-17-2011 07:19 AM|
Awesome info guys thanks.
|10-14-2011 07:27 PM|
Looks like the Glide is only 1/8" shorter, so no problem there. The Mount is about 3/16" difference, slot the Hole to fix that.
Your Glide should be 27-spline Output Shaft same as the TH350.
55-64 use 16-Spline.
|10-14-2011 08:27 AM|
|69chevy 434ci||So the yolk for the glide should go right in the turbo its just a matter of the legnth? Also i have heard rumor of possibly having to change the cross member any thoughts? the th350 is a short shaft.|
|10-13-2011 04:26 PM|
The tail housing is different , GM built the Th350 with 6 / 9 and 12 tail inch housings. you will have to measure the trans from end to end to know for sure. JMO
|10-13-2011 03:54 PM|
|lg1969||I'm not sure of this. The length of Power glide and a TH350 are the same.|
|10-13-2011 03:42 PM|
|10-13-2011 03:31 PM|
It should work GREAT !!
If you have the same length T350
GM did make a few different ones.
|10-13-2011 12:29 PM|
Power glide to TH350
Hey guys I am working on a 66 impala and need to know if I need to change the drive shaft when I put the turbo in, or will the one from the glide work.