Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Hotrodding Basics> Sbc Top End Kit
User Name
lost password?   |   register now

Thread: Sbc Top End Kit Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-28-2011 05:26 PM
Originally Posted by nova}{

found a nice top end kit, depending on the cam i choose and with 9.5:1 compression about how much hp and torque would this make off a 350?
I'd buy it just for the red rockers!

Power is cam and compression dependent. This comes first then the intake, carb, exhaust as these are supporting characters. Not that good intake and exhaust components don't make improvements on other-wise weak engine internals, as they do, but the really big gains come from inside unless you're pasting a blower and/or nitrous on the outside.

These are Chinese castings, they tend to have porosity problems and often prove not to carry sufficient strength under the spring pocket. A common problem with big port heads, you just can't stuff everything in a box of limited size. You gotta watch the push rod length many of these require adding a lot of length on the push rod, this makes it pretty flexible so you have to step up to better push rods in terms of material used and/or diameter and/or wall thickness.

Haven't used these myself just passing on what I gleen looking over other peoples fenders.

Keep in mind the piston is part of the combustion chamber. While top end and cam improvements make plenty of power on there own better piston shapes really enhance what these parts do. So if you need pistons, this is always a good time for flat tops or D dish crowns as these configurations greatly support the effects of squish and quench which is where these modern heads are getting their fabulous power numbers from on unleaded E10/15 fuels.

10-27-2011 03:28 AM
327NUT I see no one has chimed in yet, it looks like a pretty nice set up for the money....but you really have to do your research on stuff like this. I looked at the ebay add and first thing I would do is call Brian and ask him for a few references. If he's got nothing to hide and is on the up and up then he should have no problem with that. Since he does have a dyno he would be the one to ask about a reasonable hp estimate.

Also depending on your application....daily driver, weekender or race car only, make sure you pick the right cam, some guys, well a lot of guys over cam and carb their engines and wonder why it doesn't run right or isn't very street friendly....good luck.
10-26-2011 08:10 PM
Sbc Top End Kit

found a nice top end kit, depending on the cam i choose and with 9.5:1 compression about how much hp and torque would this make off a 350?

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 11:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.