|11-29-2011 06:19 PM|
Ed, right click and copy the picture Shortcut, then open it in a new Browser or click this Link below >> http://www.hotrodders.com/forum/atta...chmentid=60266
Was the Wiring Diagram still too small when you clicked on the Thumbnail Pic?
Several TCC Lockup wiring Diagrams here:
|11-29-2011 04:04 PM|
thanks for responce but cannot read it too small
i thank you for your responce but at full mag. still cannot read it. is there someway you can send it in larger detail?
|11-28-2011 04:32 PM|
|jmsaunders||Here's how I have mine wired.|
|11-28-2011 03:57 PM|
trans. is it a 700r4?
i am doing up a 1965 chev. stepside p.u. i took a 1986 chev suburban removed front end saddel and replaced the 65 with it. giving me power steering and power disc brakes. i also installed eng,trans&rear end every thing fit just fine . my question now is on the trans that i think is a 700r4 there is a plug on drivers side it has two wires cut off i think it is for the lock up converter . where do these wires come from or how do i hook it up?
thanks for any help ed.