|12-02-2011 11:13 AM|
This is no problem, unless you have removed both handles and all the rods and they are on the floor next to the car. Just remove one side at a time and you will not have a problem, they are very simple. You can see which arm holds a rod and one rod will fit that length and one won't. It really is super simple once you get into it.
|12-01-2011 11:54 AM|
Have a question about the door handles and looking mechanicism on a 88 Mustang(power windows). The doors will open from the inside, but not the outside. I'm planning on replacing all handles, but does anyone have a diagram on how all the connecting rods go inside the door?