|12-18-2011 10:47 AM|
There's a company that is reproducing these in fiberglass. HERE is the link. They're about $50 I think.
"Speed has never killed anyone, suddenly becoming stationary… that’s what gets you." – Jeremy Clarkson
|12-18-2011 07:38 AM|
|12-18-2011 06:42 AM|
|deadbodyman||when I went to my first metal shaping class I made a harley fender in about 4 hrs and had a ball ......I'd make them for sure...www.metalmeet .com|
|12-17-2011 10:46 AM|
The classic is using a thirties Ford spare tire cover cut in half.
|12-17-2011 08:28 AM|
A lot of options, In the 50's we used the chrome spare tire covers from continental Kits ( for the youngsters, thats when you extended the back bumper brackets back and mounted the spare tire between the trunk and bumper. ) a lot of the 70's custom vans had outside mounted spare tires and metal covers.
|12-17-2011 07:57 AM|
|1ownerT||Motorcycle fenders would be another option.|
|12-16-2011 11:52 PM|
What I do for narrow fenders is to get a pair of trailer fenders and take a strip out of the middle and weld them back together to get the width I need..makes wider fenders as well by inserting a piece..those are usually 18 gauge and not herd to work with..
|12-16-2011 09:42 PM|
front skinny fenders
where can i find a set of front fenders like the ones on milners coupe in american graffitti? thanks