Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> Blocking body lines
User Name
Password
lost password?   |   register now

Thread: Blocking body lines Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
03-08-2012 10:53 PM
tech69 looks like you haven't sanded the other side of the line but it's probably low too. I'd lightly block the other side of the line to see where it's at. Most likely you'll have to spot in some filler. To do this just try to fill only what you need and leave your edges of the filler feathered with the spreader. you can do that after you wipe in your filler. That way you can block only on the bulk of the filler and when it's near level you can extend your strokes outwards onto the primer to blend it in. The tape line works well but will only be as perfect as how you lay the tape an easier way to get it started in the right direction is to **** your block at an angle and let your block ride off the edge by letting the line define itself. Doing that on both sides of the line will guaranteed get you a perfect line. The only draw back is that since you're sanding straight you can leave a slight flat spot you have to deal with. This is where hand feel comes to play and block skills come into play. Watch this video where I block the left door(14:30) and it will show you how to do it.

You can do what I suggested and then use tape and it will turn out perfect in a quicker amount of time.

http://www.youtube.com/watch?v=gmw98...1&feature=plcp
03-08-2012 10:15 PM
67Elcamino
Blocking body lines

Im attempting to perfectly block the bodylines on my project and wondering hot to built up low spots on the bodyline. Do I remove the tape, build up and retape the line or can I built with the tape in place. Im using featherfill G2 to build before blocking. Give this is a faily big low spot should I use polyester filler or shot featherfill?
Also I used laquer primer as a guide coat can I fill directly over the laquer guide coat? or should I sand it off first?
[IMG][/IMG] >

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 11:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.