|03-24-2012 09:10 PM|
|bbowerman||Thanks for the quick reply I was right about 1 but not 2 thanks a lot|
|03-24-2012 09:07 PM|
#1 is a Vacuum Modulator, it should be connected to Full vacuum port on the Intake Manifold. Normally between the Carb & Distributor on a Runner.
#2 is a Vent for pressure to escape from heat build up.
|03-24-2012 09:01 PM|
T-400 vacuum line Identification
I have a TH400 transmission and I am wondering what the 2 vacuum lines on the transmission are for.
thanks in advance