Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Timing Issue
User Name
Password
lost password?   |   register now

Thread: Timing Issue Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
04-08-2012 09:27 PM
cobalt327 ------------------
04-08-2012 06:05 PM
smokey626 Ok, you guys aren't gonna believe this (because I sure as heck don't) but, as I was taking off the cap, something inside caught my eye, or should I say DIDN'T catch my eye. The damned tab inside the cap for the #1 cylinder was missing! I got a new cap, reinstalled everything and fire the motor back up. Viola'!! No more pop through the carb and the timing mark now lines up!! Any of the pros seen this and can explain why the missing tab made this all happen? Here's a pic of the motor on the run stand! (hopefully!)
04-08-2012 05:22 PM
68NovaSS
Quote:
Originally Posted by smokey626
...PS How does a guy attach a pic or video?
Take a look at this sticky...
04-08-2012 04:24 PM
T-bucket23 Taking the dist out and putting it back in is not going to help. If it is running it is close to being correct. There is no way it is running 64 degrees retarded so you are doing something wrong. Are you running an MSD box by any chance. Some timing lights do not work correctly with the multi spark ignitions.

The first thing you should do is prove the damper tdc is actually TDC. Search on here for finding true tdc and make or buy the tool. Until you prove the damper 0 is actually close to 0 doing anything else is a waste of time.

Moving the distributor will not help you.
04-08-2012 03:12 PM
smokey626 #6 wire a no-go, still 64 degrees out. I'm gonna restab the distributor and see if that's out a bit. Sport, bite yer tongue Buddy! lol This motor has a gear drive in it, and I just looked at the pics from when I put the front end of the motor together, and the crank and cam are indexed properly. Also, I used a degree wheel before I dropped the heads on to make sure everything is in line. I'm not the one that dropped the distributor in, so Im gonna check there.
Thanks again!
Smokey

PS How does a guy attach a pic or video?
04-08-2012 03:04 PM
lmsport If distributor is installed correctly, and plug wires are on correctly, and it needs that much lead to just run then the cam is not indexed to the crank properly.
04-08-2012 02:46 PM
smokey626 Nope, light is on #1. The balancer is a brand new FluidDamper (sp?) so I'm pretty sure it hasn't slipped. I will try the #6 wire and see what happens. Thanks!
Smokey
04-08-2012 02:36 PM
cobalt327 X2. Be sure the timing light's inductive pu isn't getting signals from the wrong wire, even if the pu is on #1. Use #6 plug wire if there's cramped quarters around #1.

Info HERE on the different timing tabs/damper lines that can also confuse the issue.

Be sure the outer ring of the damper hasn't slipped, more HERE on finding TDC.
04-08-2012 02:21 PM
lmsport Have you got the timing light on the #2 wire?
90-64=?
04-08-2012 02:16 PM
smokey626
Timing Issue

Ok, here's a new one on me. I fired up a new motor this morning, and it spits a bit through the carb when firing up but then smooths out in the higher RPM range. Here's the new to me part: when I went to check the timing, my gun found the timing mark at 64 degrees ATDC. Moving the distributor kills the motor. I've triple-checked the firing order, have checked TDC on the balancer to the #1 piston and have run the valves 3 times. Where have I goofed up? I guess some info on the motor would be nice. It's a '75 Chevy 454 bored and stroked to 468 ci. Has a mild Comp Cams Thumpr cam, roller rockers, a Summit 750 cfm carb and an Accel big cap HEI with Accel 8mm wires. I don't see a way to attach the video here, so tough noogies there. HELP! lol
Smokey

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 05:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.