Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> Paint Questions
User Name
Password
lost password?   |   register now

Thread: Paint Questions Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
05-18-2012 10:42 AM
aarias-31
Paint Questions

Thank you this helps alot clears up some questions. Is it common to be able to see the body filler thru the epoxy primer? It seems like after we sanded the epoxy it appeared that the areas of body filler were harder to see.
05-18-2012 08:17 AM
TNshadetree It's not unusual for primers to have a rough texture after spraying. Doesn't really matter since you'll be sanding it.

One tip: Most people like to spray the epoxy and then follow up with the primer surfacer in the same session so they don't have to sand between them. Saves some manual labor. So you let the epoxy dry for an hour or so then go ahead and shoot the surfacer. That way they bond chemically.

There is no need to sand the base before clear. You use the same method described above. The base will have a "recoat window", meaning there is a window of time where you can shoot the clear and it will "cross link" or chemically bond to the base.

I advise find an old fender or some panel to practice settings and speed with your gun to make sure you have it shooting as smoothly as possible. If you still end up with texture in the clear coat, you can solve it by "cutting and buffing" the clear. Make sure you shoot 3 coats so you have enough to sand down. Of course on the clear you use very fine sand paper to correct texture like 1500, 2000, 2500 etc. And you will need a good ginder/buffer to be able to buff out the tiny sanding scratches with polish.
05-18-2012 07:31 AM
aarias-31
Paint Questions

I just sprayed some epoxy primer on my sons truck. It sprayed pretty well but after it dried it seems to be a little rough feeling, you can see the areas where we used body filleralso. Someone said that the filler absorbs the primer and probably needs more coats. We wet sanded it with 400 just a little and now it feels smoothe. I am going to spray 2k on next and wonder if it will do the same thing. Also, after we wet sand the 2k and spray the base coat will we need to sand the base also? What happens if the clear is rough to the touch as well? Any ideas or help? Thanks

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 04:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.