|06-18-2012 10:49 AM|
LOL I read it 3 times LOL I was really confused LOL
|06-18-2012 05:27 AM|
Block the carb wide open for the test- do NOT forget to return it before starting!
|06-17-2012 10:11 PM|
|Greg T||Sorry. Wrong topic!|
|06-17-2012 09:39 PM|
bk2life-- im consuming oil. wet side pipes but not very much smoke at all. spark plugs arenot foul with oil.
jester---i figured the tester was bad. wanted to see if anyone had that same issue.
|06-17-2012 01:54 PM|
|Greg T||Stop lugging the motor to 1k RPM! Drop a gear and run second or change the rear end gears.|
|06-17-2012 11:12 AM|
Sounds like the valve in the tester is leaking back! It should hold pressure on each piston stroke till you manually release it!
|06-17-2012 11:04 AM|
need more info.
why are you doing a compression check? whats wrong with it?
|06-17-2012 10:02 AM|
help my 383
did a compression test on my 383. engine at 200deg. all plugs out. when i turn the key the gauge is jumpy and moves really guick. i can see it goes up to 160 ish but its to fast to deterimine a real number. needle goes up rapidly then down. it doesnt build pressure or slowy move and stay at a reading. its like this on all cylinders. any comments?? doing a leak down tomorrow.