Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> Tips for 2k seam sealer application?
User Name
Password
lost password?   |   register now

Thread: Tips for 2k seam sealer application? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
06-25-2012 11:00 PM
tech69 I remember this loud mouth sales rep was clowning on me for my seam sealer selection and said the shop should order this certain kind that sets up so it looks factory like Toyota seam sealer for skins where it looks like a strip. He saw me applying the tape and had this smurk on his face cause I told him I already can make it look factory. So I applied it with my twisted up pieces of paper towels in wait and he had this arrogant look on his face up until he saw me carefully wiping up the stringy pieces that stuck to the tape. Damn sales rep...can tell about every component in a product and how to apply it to manufacture recommendation but YOU have to tell him what's revellevant and how to REALLY apply it.
06-24-2012 10:01 PM
MARTINSR You are very welcome, thanks for the kind words.

Brian
06-24-2012 05:46 PM
hinges56 [QUOTE=MARTINSR]Here is the "Basics of Basics" on seam sealers. (click here)
Once again Martinsr, whether you know it or not, You have taught me a lot. Good link on the basic of basics on seam sealers. Mostly common sense but a lot better than trying to figure it out myself! Thanks for all help you give me and everyone.
06-12-2012 06:37 PM
Lizer thanks for the info folks. I'm glad I didn't get a bunch of weird looks for using my finger. My seams don't look as nice as I'd like to but I don't know what else I would have expected in my first time using this stuff.

The people at the store advised me against the self-leveling only because it is so difficult for a n00b to use as you guys have attested to. That and by that point I was already walking out with $150 of materials between the gun, two tubes of sealer, and a bag of extra tips.

Which by the way, PlioGrip makes the gun for 3M as well, except the PlioGrip gun costs $50 and the 3M gun costs $70. Which also means the PlioGrip and 3M seam sealers come in the same cartridge so you can actually use both with the same gun. I had put on the Fast n Firm several years ago as well as the 3M brushable. Both were crap and have been cracking. I removed what I could and this stuff works very nice.

The really nice thing about it is 0 VOC! It literally has no odor! That Fast n Firm (reminds you of when you were a teenager doesn't it? ) or brushable sealer would about knock you out if you weren't wearing a respirator.
06-12-2012 01:26 PM
MARTINSR
Quote:
Originally Posted by tech69
You have great tips on that site. Another good thing to mention on that tutorial is self leveling for drip rails and making a dam.
Thanks Henry, yeah that self leveling has a steep learning curve don't it? (No pun intended)

I have done it where I literally jacked the car up to the area I was sealing was level, then slowly lowered the jack allowing it to flow where I wanted then holding it there or lifting it back up a little as it kicked.

This is a regular with those friggin Mustangs from the 80's in the trunk gutter where the damn hinges were sitting in seam sealer!

Brian
06-12-2012 01:13 PM
tech69 You have great tips on that site. Another good thing to mention on that tutorial is self leveling for drip rails and making a dam.
06-12-2012 11:49 AM
MARTINSR Here is the "Basics of Basics" on seam sealers. (click here)

Brian
06-12-2012 11:45 AM
swvalcon If you want a straight edge put a piece of 2" masking tape on each side then put down seam sealer, wipe with finger and after a min or two peel off the tape.
06-11-2012 11:34 PM
tech69 scotch brite is fine but lots of guys just seal right over it and paint.
06-11-2012 08:20 PM
Lizer
Tips for 2k seam sealer application?

I've just started adding some Pliogrip #6 low sag 2k seam sealer on the Mustang. Right now I'm doing the old fashioned smooth out with the finger trick then wiping any ridge down/away with a paper towel. After it set up I tried sanding it down with a red scotch brite but I can't help but think there are probably some better ways for me to do this, or even tips or favorite methods that some of you guys have.

I got one of my modeling brushes to try but by that time I had the gun setting around too long and it set up in the tip, so I just stopped for the night and will do some more later after I have more seams prepped so I get the most use out of a new tip.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 03:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.