|09-16-2012 07:50 PM|
|Bigford99||7 psi in the rear, and as far as springs, they are actually the ones The guy at Strange recommended for the car. As far as a video, I don't have one. One of the other guys may, I'll ask the owner tomorrow.|
|09-16-2012 09:14 AM|
|monster76||What pressure are you running in the rear tires do you have a video of the car going down so we can see how it is acting|
|09-16-2012 08:32 AM|
I'm thinkin' maybe your rear coils aren't rated high enough. Maybe some info in this link that might help.
Setting Ride Heightİ, Coil Oversİ, Engine and Pinion Angleİ by Dean Oshiro
|09-15-2012 09:44 PM|
Pinto drag car gets loose down track
Ok guys, we have been working on a 73 Pinto tube chassis car, ladder bar suspension, Strange coil overs w? 110# springs, Strange struts up front w/ 225# springs. 2400# with driver, 650hp 406sbc with a powerglide, 14x32 slicks. We have been battling this car to get it to launch and stay straight down the track. We finally got the launching part ironed out somewhat with a 1.29 60' tonight, but now the car skates around from 330'- the 1/8th mile, peddling it several time he ran a 6.36, then the next pass, he ran a 6.09 still having to feather it most of the way. Has anyone had any problems like this? Or any suggestions on where to start looking?