|09-24-2012 09:44 PM|
|DanTwoLakes||I forgot to mention the chicken wire. That doesn't need to be there, and there are a lot of things that could be used in its place.|
|09-24-2012 07:57 PM|
Dan - I went through a bunch of the photos on that link - nice top, but the upholsterer still used chicken wire. I need to spend some more time with that link as there did appear to be some other interesting things done - welting, hidem nailers, sheet abs.
|09-24-2012 04:24 PM|
|DanTwoLakes||Here you go, check out this link: http://public.fotki.com/Rikster/11_c...052.html#media This top can be made much easier and better looking by using today's upholstery materials instead of the chicken wire, canvas, muslin, and cotton.|
|09-24-2012 01:11 PM|
Padded top for my '31 A
When I was first building my '31 roadster, I assembled a frame for a padded (Carson style) top intending on using that instead of a modified Ford Model A top. Several years later, I have a modified Ford style top on my car. Looks good, well made - but it acts like a sail(wind collector). I have some photos of the construction - in process - none of the finished framework though will take some soon. This gets me to the question - How is a padded top made? I prefer to NOT use chicken wire as the final form as the original Carsons were made. Someone!! Point me in a direction so I can at least dig out some information, do some reading on these tops so that maybe I can finish it one of these days.