|10-06-2012 01:24 PM|
|vinniekq2||have you dynoed your car? are you driving it on the street daily?too loose of a converter is no fun for a daily driver,give up 2/10s for a nice driver if its a street car. need to know the rpm range of your engine,,,|
|10-06-2012 01:35 AM|
|10-05-2012 09:59 PM|
i would try it i think it will get you into the 3200/3400 range
|10-05-2012 06:39 PM|
Converter and stall speed recommendation?
I've got a '72 Nova, stock weight (3400 curb), TH350 trans, 3.73 posi and an engine with the following specs:
350 "010" block
EQ 200 CC Heads (lightly worked over)
Comp Cams 12-772-8 (248/254 @ .050, .576/.582, 110 LSA, installed straight up)
Forged bottom end, 6" rods
Vic Jr intake
Holley 4150 750cfm carb
The comp cams website recommends a stall of "over 3000." I have a 10" converter sitting around that came out of an old friend's 454/th400 combo that stalled at 4000 (it made 510rwhp). It's a very high end converter. I was considering using this one but am open to suggestions.
I'd appreciate anyone's comments on what they'd recommend