|10-15-2012 07:40 PM|
|RadRidesByDan||I had the Weiand stealth on mine and it was great.....dual plain....kept the power band low where I needed it. Best bang for buck in my opinion|
|10-14-2012 11:36 PM|
Weiand 8012 - Weiand Stealth Intake Manifolds - Overview - SummitRacing.com
Edelbrock 7166 - Edelbrock Performer RPM Intake Manifolds - Overview - SummitRacing.com
Either design will begin pulling at around 1,500 rpm's and will give you better mid-range than the low-rise standard Performer in my opinion.
|10-14-2012 11:03 PM|
Ford 460 intake questions
I have a 86 460, freshly rebuilt with a Howards RV cam(213 degrees @ .050, .502 lift,111 lsa, 106 centerline) 2.19/1.88 valves bowl blended and port matched, 8.5/ 1 comp, HEI style ign, arp hardware but otherwise stock and will be used for towing.
On this tame of a motor is the Edelbrock performer better or the Wieland Stealth the way to go?