|12-12-2014 11:21 AM|
Here's my 64 C10
It has a 350/700R4
All new brakes and lines, it's going into my garage so I can start on the body.
|12-12-2014 11:18 AM|
|Indian113||Nice Job, I like your guards and the way they fit|
|12-12-2014 09:55 AM|
Cab Corner Splash / Gravel Guards for Step Side Bed
I fabricated some gravel guards for my '65 C10. OEM style are available aftermarket for about $80 a pair. I've got $15.00 in these, and modified the design to hide the reveal on the back of the cab.
For more details and a drawing of these click on the build thread link in my signature line.
Here are some photos:
I used the same "Faux Patina" process that I used on the rest of the truck
|07-29-2013 08:40 AM|
|10-28-2012 08:46 AM|
|10-27-2012 10:35 PM|
It's a 454 block out of a 1979 C20 (TH400 trans out of same donor)
which I bought for $800.00 and drove it home.
Bored .030 & Balanced
Forged Flat-tops Clevite (Mfr'd by Probe, IIRC) 224-2519.030
Comp Cams XE284H camshaft
Reconditioned (stock) 781 heads
3/8" pushrods and guideplates
New Scat 9000 Crankshaft
Pioneer Rod bolts
HV / HP oil pump & screen
Edelbrock RPM Air Gap
Holley 3310 (750 CFM)
Lots of chrome
Overhauled the TH400 and installed shift kit
B&M Nitrous Holeshot 2400 RPM stall convertor
I had the engine built with an underdriven 6-71 blower in mind, but that seems like just a dream at this stage of the game.
Suffice it to say that life has been getting in the way ...
|10-25-2012 06:23 PM|
Oh well, she's got the rest of the house
BTW, 66GMC that's a beautiful job you got going so far. Specs on the engine?
|10-25-2012 11:13 AM|
at least it's not sitting outside getting more patina...
|10-24-2012 10:02 PM|
Here's my 66 as it looked the last time it was driven (2005?)
I'm embarassed to say that I've been stuck at the "rolling chassis" stage for WAY too long. (Feb 2006!)
The date stamp on the pic is wrong, but still ...
|10-24-2012 12:00 PM|
|Valkyrie5.7||Yours is looking great. I've got rid of the 350 chevy with a 70-72 455 olds that's sitting on an engine stand right now. C heads, Torker intake, matching q-jet... came out of a boat. I also got rid of the fleetside bed and now it has a lwb stepside off a 62 GMC. Not a lot of time with a new baby. Looking for a good st-10 or muncie and a hydroboost system. Hoping I can find an olds diesel-powered 73-87 and kill two birds with one stone. Clip should swap in with very little work.|
|10-24-2012 11:54 AM|
excuse my salute, it's the only pic i have of mine
traded this for a 59 truck
|10-24-2012 06:13 AM|
BTT. I guess there aren't many 60-66 owners here?
|12-11-2011 07:14 AM|
'63-66's C-10's had the ladder style frames with coils.
So, 63's are kind of a one year only deal, wrap around windshield knee knocker cab with the updated suspension.
Got any photos of your new aquisition?
|12-04-2011 10:53 PM|
|11-30-2011 08:00 PM|
|Valkyrie5.7||1965 long bed with bench seat, smogger 350 and 3 spd. Not much right now. Waiting for the better half to give birth to my first child before I incur any "unnecessary" expenses|
|This thread has more than 15 replies. Click here to review the whole thread.|