|11-08-2012 01:09 AM|
ok coool sounds good
i have a brake pedal from a 72 chevelle disc brake
Ill swap it
thanks a lot
|11-07-2012 11:33 PM|
|tresi||please ignore my post|
|11-07-2012 11:32 PM|
If that's OK you can increase the master cylinder bore diameter or decrease the caliper bore diameter, or decrease the pedal ratio.
I would try the pedal ratio first. See if you can move the clevis to a hole nearer the pedal than where it is now. This may also require an adjustment to the pushrod length.
|11-07-2012 11:30 PM|
|11-07-2012 10:50 PM|
disc brake way to sensitive.....
I just convert my 71 nova to disc brake
everythings works fine.... may be way to much...
i have to be very carrefull with the pedal , and dont push all the way because
the brakes will lock the wheel
what can i do ?