|11-16-2012 04:27 PM|
I have a set of new reconditioned 5.94 rods and a set of std. flat top forged pistons on E-bay right now for a really good price.
I ended up buying a set of I-con forged hollow dome pistons ($400) and forged lightweight rods for mine. I did this because I got a deal on some aluminum heads with 64cc combustion chambers. I sold the LT1 heads I had.
And yes, there are forged and cast 283 cranks. I have both. The cast has the same casting as one one posted above.
|11-15-2012 08:36 AM|
In your case (using boost), you'd want forged. But for the majority of builds, a good cast piston would be just fine.
FWIW, there is a franken-build you could do using the crank and rods from the Gen 2 L99 engine. The rods from the L99 are 5.94", this will allow you to run off the shelf 350 pistons with the L99 3.00" stroke crank. Takes a 1-piece rear main seal block.
Or use spacer bearings to put the SJ 283 crank in a 4" bore block. Use the L99 rods to run stock CH 350 slugs.
BTW, the rear seal area of the 283 crank has to be inspected to see if it originally used a rope seal or 2-piece rear main seal.
|11-15-2012 12:48 AM|
did you buy a 283 crank or 302 crank?
a fella here,painted jester built a pink engine for his wife
|11-15-2012 12:32 AM|
|Rick0087||As far as the crank goes I think it is a cast steel I recently bought a forged steel crank and have them side by side and you can see the difference and even hear the difference when you tap the counter weight with a hammer. I'll try to post some pics up once I get the photos up online.|
|11-15-2012 12:26 AM|
|Rick0087||I totally agree that there are more suitable and practical ways to go. However the reason for this build is for nostalgia with a modern twist but is mostly for a family member that has recently been diagnosed with cancer and is my inspiration for the engine. He had the 302 Camaro in his youth and it later became his speed boat engine after totaling his Camaro. When he put it in his boat he painted the engine pink and once I have mine together I will also follow suit and pay homage to this man who has helped shape my life. Most likely more than most of you wanted to know but that's my reasoning behind this build.|
|11-15-2012 12:05 AM|
|vinniekq2||I will build another 283 when I find the correct car to put it in. I think a 370 horse N.A. 283 would be fun. for a turbo small block,I think the 6 liter ls engine is the best place to start for being practical|
|11-15-2012 12:02 AM|
283 Crank id issues!
I checked out the casting number on 8 different websites. Seven out of eight say it is a 283 small journal forged crank. The only site to say it was cast is nastyz28.com. I have found information from that website to be incorrect several times before.
|11-14-2012 11:39 PM|
|Rick0087||well for me there is a multitude of reasons and I'm going turbo charged, more efficient hp than super or blown and when it comes to forced vs. HIGH C.R. N/A. There is very small price difference in the over all build either way I'm spending good amount of money on Ignition and Fuel system so why not. I'm not looking to break records or be the biggest guy out there or anything, I just want to have fun and doing this kind of build is a part of it for me. If i wanted to go fast for cheap I would just do what everyone does and get a 454 and slap boost or nos to it till i blows up and get another one! Plus its for my 69 Nova so I'm looking for handling, power, and engine response.|
|11-14-2012 11:12 PM|
|vinniekq2||super charged 5 liter? just to be different? and really.$500.00 is the cheap part of a super charger build.|
|11-14-2012 10:46 PM|
|Rick0087||Thank you so much cobalt327 Now it makes sense to me! I would buy 302 pistons if they weren't 500+ dollars a set with out rings! also on that note its hard to find a 302 dish piston for running forced induction. my goal is 8.5-9CR The other huge problem with 302 piston is most of them are around 11-1CR and while I love a nasty N/A V-8 I can't see using race gas to just play around cause that's what I will mostly be doing don't get me wrong I will be going to the drag strip and autocross.|
|11-09-2012 08:49 PM|
So the stack would look like:
deck height (9.025" to 9.00") minus 1/2 stroke (1.5") minus rod (6") = 1.525" CH, or 1.50" CH if zero deck (9.00") block.
Using a rebuilder piston this puts the top of the piston out of the cylinder at TDC by 0.015" if the block is uncut, or 0.035" using stock CH piston.
Using a zero deck block, the 1.54" piston is 0.040" out; 0.060" out if using stock CH pistons.
|11-09-2012 08:27 PM|
first,just buy 302 pistons,use 283 rods and a small journal 327 block.
Problems: 283 uses a small pressed on ,one piece balancer,many prefer to use the bigger 2 piece balancer. If you have a 350 block,then buy a large journal 302 crank. then its worth upgrading the rods.large journal rods are more common so price is fair.
If you have a 283 block then consider building a 292 (060 over 283) you only lose 13 inches.
Depending on how much horse power you want? its easy to get too much cylinder head on that little engine. A small runner 2.02 head will make lots of power. I wouldnt build much more than 425 horse power for a normally aspirated 5 liter
|11-09-2012 08:06 PM|
|11-09-2012 03:39 PM|
|Rick0087||so the machinist has verified it is a cast crank so it looks like i am buying one from him. grrrr heres a question for you guys that he mentioned to me about making a 302 is the pistons height is like 1.8 and a 350 piston height is 1.5 so couldn't I just use a 350 piston 5.7 on a 6" rod to make up the difference? so the piston height would be back up to stock 1.8???|
|11-09-2012 10:40 AM|
|Rick0087||So I am going to take it to a machinist that specializes in cranks today and see what he has to say. ill try to get some pics up of it here soon and let you all know the results. and for its purpose I am building a 302 yaya i know lol I did happen to stumble upon an original 302 DZ engine with original crank waiting to see if its for sale was left a my machinist shop for over 2yrs so i might have a chance at getting it ya y1a|
|This thread has more than 15 replies. Click here to review the whole thread.|