|11-15-2012 07:22 PM|
|hcompton||You can try taking the cap off and see if the mechanical weights are getting hung up when you turn it. Did it hit the fire wall during install it mau be bent if the mechanical advance is pulling it back. Alsonare the wires connected and pulling on it or vacum line.|
|11-15-2012 07:19 PM|
|11-15-2012 03:22 PM|
distributor hei que.
After fresh reb motor (350) turns over few times and when I loosened the dist screw to turn for better timing, motor was off, dist turned like it was spring loaded. Does this mean I am off a tooth or is this normal? Advise, thanks Dana