|12-10-2012 09:58 AM|
car has a 1995 ford 302/with boss applications
|12-10-2012 07:33 AM|
There is some info in the HAMB forums, More flat head guys on that forum.
|12-10-2012 06:52 AM|
|Irelands child||Tell us more - stock flathead or engine transplant? Stock suspension? Chassis? What do you want to do with this car eventually. These cars didn't steer hard with the original 6-710x15 tires, but newer larger radials can increase the effort some, but not much. Finding an original '50s FoMoCo ('49-'53)type PS arrangement that still is in working order will be tough so anything else will be an adaptation and a fairly extensive mod with the big front cross member, the little original steering box and drag link/king pin front end with large 'A' frames|
|12-09-2012 11:46 PM|
Is this a stock 50 ford? no engine mods or suspension mods? I tried on a 50 Lincoln years ago I couldnt find a pump that would mount right, and gave up but heres a good article, Some 53s had it
Ford Flathead Power Steering System - Rod & Custom Magazine
I saw a flatty a few years ago at a show with an electric pump and early corvette power assist cylinder installed I dont know how good it worked
|12-06-2012 12:39 PM|
Welcome, post this question in the suspension forum for a better response.
|12-06-2012 10:13 AM|
power steering on an original 1950 ford
any one help me figure out on how to put power steering on a 1950 ford custome delux tudor sedan?