|01-08-2013 04:13 PM|
|01-08-2013 02:06 PM|
what did you do for the pcm? HP tuner or similar?
|01-08-2013 01:20 PM|
Well, this is the exact thing I have pulled off in my Volvo wagon. '98 Pontiac Grand Prix GTP S/C V6 (FWD) mated to a '96 Camaro T5 trans (RWD). The flywheel/clutch and bell housing bolt right up, just had to install a pilot bearing in the crank and that hole is already there, too! The caveat is the throttle body points right at the fire wall. I built a 3" aluminum tube to turn the TB around. I also cut and re-welded the throttle quadrant so it pulled from the back side. If you need info/parts go here: http://www.zzperformance.com/
Here's a few pics:
|01-08-2013 12:21 AM|
GM 3800 supercharged engine stuff
Thanks for the information. Now ************** kit contains complete items as needed. These 3800 supercharger kit is best in all with all genuine parts which is used for long lasting also.