|03-07-2013 12:02 PM|
call your local suspension shop. Building mine they hooked me up with awesome information and a whole lot better pricing then catalogs prices. They asked what engine horse power drive train tire sizes
|01-12-2013 08:34 PM|
1946 Chevy 1/2 Ton on S10 Chasis
I have found a ton of information on this forum however there are a couple of question I cannot find the answers to. I have a 1946 Chevy 1/2 ton truck that I have placed on a 1991 S10 single cab long box chasis with the help of a chasis conversion kit i bought, made it pretty easy. I am placing a 350 that has around 400 HP in it and I will be placing a TH400 transmission in it as well. I am not sure what rear end I am putting in it yet but it will not be the stock S10. I plan on having this truck for another 30 years before I pass it on to my son so I would like to do it right the first time. I have listed my questions below.
1. From what I have read the coil springs are not really strong enough and I have found them on line but how do I know what strength of spring I need?
2. I have also read that I will need to change out the rear leaf springs because they cannot handle the torque but I have not seen anything indicating what to replace them with.
3. What else would be recommended to change out in the front end for the increased weight and horsepower?
4. I know I need to replace all the bushings in the front end and I was wondering if there is a certain brand that you would recommend? i would like to find a kit for this.