|02-06-2013 04:38 PM|
|02-06-2013 02:34 PM|
|02-06-2013 01:20 PM|
|ogre||i really need to clean my engine bay|
|02-06-2013 01:19 PM|
i have mine installed in my lower radiator hose foir the past 15,000 miles
a short piece of ss exhaust tubing and half a ss coupling.
don't forget to add a ground wire if you go this route.
my thoughts on installing it in the lower hose?
in the intake the fan will run anytime the motor is warm even if the thermostat is closed and the radiator is a frozen block of ice.
in the thermostat housing the fan will run every time the thermostat opens, even if the radiator is cold as ice.
lower hose the fan will run only after the radiator is warm and not doing it's job
i should put an led in my cab to see the cycle times, but it has worked fine for 3 years.
why fix it if i ain't broke
|02-06-2013 09:27 AM|
|orlando295||i have a tapping on intake man but my temp gauge is there now could i move that to the head and use the front one on intake for sensor and will my gauge read temp right on the head?|
|02-06-2013 09:18 AM|
|sedanbob||One option might be to put a bung in the bottom of the radiator (that's an option on most aluminum rads), but either use an adjustable thermostat or a lower temp, since the bottom of the radiator won't be as hot as the top of your intake.|
|02-06-2013 09:11 AM|
|02-06-2013 08:03 AM|
i'll assume u don't have a plug on the front of intake nx to the stat??? there is a plug on ea head in the middle of the 2 center plugs. u can use that. may not be the greatest place but its a place..
|02-05-2013 09:47 PM|
|orlando295||if it helps its a wieand intake man|
|02-05-2013 07:51 PM|
electric fan heat sensor
hi i have a electric fan i need to install but not sure where a 3/8 port is on my 350 chevy motor too install the heat sensor also car has a blower on it if that makes a diffence please help pictures a big help