|02-27-2013 03:10 PM|
|DanTwoLakes||A lot of times, if the foam is not completely destroyed, you can just add a layer of 1" thick foam to the original foam and improve the seats immensely. Corvette seats are a prime example. For some reason, the original foam loses its support and needs to be added to. This will not work if the original foam is not in good condition.|
|02-27-2013 12:08 PM|
|bigdog7373||I'd just find a good shop to do it, not that guy you went to the first time. No reason to be an a** to your customers. Unless you know what you're doing you'll be much happier paying for someone to do it right and the seats turning out good. I'm very cheap too but i know when i should pay to have it done right.|
|02-27-2013 11:29 AM|
I have a pair of Procar Sportsman 1605 seats that the seat cushions and the leg bolsters need the foam cushions replaced.
I contacted Procar and they do not offer the foam replacements for these seats only the covers.
Anyone out know of anyone who offers the foam cushion replacements.
I went to a local shop and the guy was a complete *****.
I was thinking that I could disassemble the seats and redo myself (I'm cheap)
What kind of foam holds up the best and is easy for a novice to work with?
Thanks in advance.