|04-10-2013 07:53 AM|
Any recommendations for spark plugs? My head card casy i need a plug with 3/4" reach. Was thinking about buying a set of Champion RC12YC.
|04-05-2013 08:51 AM|
Patriot 23 Deg 185 Out of Box CHW SF600 Alum 185/- 2.02/1.60 N/A
0.1 0.2 0.3 0.4 0.5 0.6 0.7
56/53 101/83 147/114 190/137 227/155 245/171 248/177
This didn't copy and paste too cleanly but its flow numbers for the patriot 185's. Depending on application a single pattern cam would not be out of the question.
|04-05-2013 08:28 AM|
If you go to headbytes.com he had a cylinder head shoot out using pro comps, patriots and brodix. I found it interesting but those heads he has came in last.
|04-05-2013 08:22 AM|
if you dont know the flow numbers red
with a less than 70% exhaust flow ratio you still wont ude a dual pattern cam?
|04-05-2013 08:17 AM|
|04-05-2013 08:14 AM|
|04-05-2013 08:09 AM|
|vinniekq2||red,are you recommending a hydraulic roller tappet cam?He said way back that a roller is out of the question|
|04-05-2013 07:57 AM|
|03-26-2013 03:56 PM|
|03-26-2013 03:01 PM|
I get guys who do this and then want the $6000 trans under warranty.
You slip the clutch. The disc is cheap, and easily replaced.
|03-26-2013 09:24 AM|
Sorry to bring this thread back from the dead but i figured it would be better than starting a new one. My greed / eternal quest for more power is kicking in and Im now thinking running the 1.6 rockers is a good idea as suggested by F-BIRD.
I have already ordered the cam from summit: Mechanical Flat Tappet 275/281,.505/.520
Howards Cams Mechanical Flat Tappet Camshaft and Lifter Kits CL110102-06 - SummitRacing.com
So I will have the following lifts:
Intake (.505" x 1.0666) - .022 = .517
Exhaust (.520" x 1.0666) - .022 = .533
How much power gain can i expect with this change?
Also below is a picture of my short block ready to go back together. The cam i ordered is on backorder and will probably get here in the 2 week of april.
|03-19-2013 09:26 AM|
|Landshark928||I would pass on a Chinese cam since USA cams are not much more. Assault line is rebranded Pro Comp. look at Summit brand came if you want to save a buck.|
|03-19-2013 09:17 AM|
I quick question before i order my cam today. Have you guys used Assault Cams? I found a really good deal on them and was wondering if its too good to be true?
Sbc Solid Tappet Chevy 350 383 Camshaft Kit 279/282 Gm - KMJ Performance
|03-12-2013 12:35 PM|
|03-12-2013 09:02 AM|
|This thread has more than 15 replies. Click here to review the whole thread.|