|03-15-2013 01:09 AM|
New video up! Chrysler 300/glass/metal/fenders
the guy who was supposed to take out the glass lagged so I did it myself before putting the car in primer. Also did some rust morting here and there, wire wheeling and metal worked a fender. the fender hit on the lip is common but it's rare that a tech actually fixes the darn thing right. They'll usually just smash down the brow and mud the lip or not even see the damage at all on the lip. about 50% of damage I find in those areas have already been worked by prior tech. This one wasn't though so it still had the brow and I'm glad cause that means press this button and pull here and it will magically fix itself. Enjoy.