|04-09-2013 09:46 PM|
|ap72||The notch size is nothing special, every combo will want something different, especially depending on what carb is on top. Btw some people fill in that notch and get better results... As already noted its not easily filled and may NOT be a good move. I'd try a half inch spacer if space is tight.|
|04-09-2013 09:28 PM|
I have one for a BBC. The notch is 2.44 X .4 deep.
|04-08-2013 04:11 PM|
I first had a 1" open spacer on my AirGap but as I had room I went to a 2" open.
Previously I had tried a 1" four holer, the idle was terrible.
|04-08-2013 03:50 PM|
D/f did this,, look up carjunkietv.com on you tube..
it shows the whole thing from carving the intake to the dyno room..
|04-08-2013 02:23 PM|
|04-08-2013 02:20 PM|
6:15 of this vid.
Not sure what the measurement is.
|04-08-2013 02:17 PM|
|04-08-2013 12:49 PM|
|04-08-2013 08:30 AM|
Performer RPM Air-Gap plenum notch
If anybody out there has a Performer RPM Air-Gap laying around, can you measure the length and depth of the plenum divider notch? Would really appreciate it.