|05-25-2013 08:20 PM|
|vinniekq2||do you know the clearances the engine was built to have? I usually use royal purple or Lucas or other decent oil and I use 10-40 or better ever since I owned a rotary.|
|05-25-2013 05:16 PM|
|05-25-2013 03:50 PM|
|Catfish11||I can see running 10-30 in tx with a engine from tech but how would that translate over to a run of the mill rebuild?|
|05-25-2013 02:14 PM|
Yeah, you are right, sir! I've been there before. I think 10W-30 should be fine.
|05-25-2013 02:03 PM|
|techinspector1||You just think it's hot. Hot is in Phoenix. I lived there for 30 years and ran only 10W30 all the time.|
|05-25-2013 01:52 PM|
After my break in, I'm going to use VR1 Racing oil. Now, here is my question, it gets really, really hot down here. How many of ya think I should use the 20-50 weight, or the 10-30 weight??
Thanks for your thoughts