|07-10-2013 10:57 PM|
|EOD Guy||You should be able to bring them full screen then print as normal|
|07-10-2013 10:24 AM|
|06-19-2013 09:56 PM|
Was the car wired for turn signals and now you are replacing the TS switch? Or what?
Your PROBLEM list of wires are standard GM colors (the black wire should be brown) for TS. The car should have these same colors.
See attached schematic for each wire function.
|06-19-2013 07:33 PM|
|EOD Guy||These may help|
|06-19-2013 05:25 PM|
1964 Chevy II wagon wire code problems
I am finishing up a 64 wagon with blown SBC, but ran into 50 years of previous owners wire "upgrades".
I have a new directional (turn) signal switch with 7 wires...
1 dark blue
1 light blue
these go on the dash harness which has the following 8 wires
2 dark blue
2 light blue
I know some of the matches, but can't figure out completely.
Any advise out there? Thanks, Ron