|12-14-2003 02:04 PM|
|western star||OK sounds great. The only tq will be the intake and that's not much so it should be fine. Thanks|
|12-14-2003 01:45 PM|
|Dradee||I do the same thing,they are just as good for non tq areas.|
|12-14-2003 12:58 PM|
I don't see any problem using stainless bolts from Home Depot or any other hardware store providing they are NOT going to be used for a specific torque application. Use the high dollar bolts for the mains, rods and heads, then the others for all the simple bolt on things. I bought plain hex drive bolts for my intake and they worked fine. Go for it!
|12-14-2003 12:29 PM|
ARP stainless bolt kit question.
I priced out stainless bolts from ARP. I want to complete my motor with lots of detail. I found that Home Depot has a huge selection of stainless. Their bolts are not polished and have cast markings on top of them. I took the cast marks off and polished them and they turned out like show quality. The price difference was like 75 % less and a little work but that's fine. My question is am I getting a softer ( less strenghth ) product doing it this way or am I much safer using the ARP product. Remember I am trying to do everything from the intake down to the oil pan. Any thoughts would be appreciated. Thanks