|03-21-2014 03:16 PM|
|03-21-2014 12:50 PM|
In your particular case, I think I'd just spray it with some non-residual cleaner like they use for carb linkage, etc
eg. CRC (Carlin) #79585 (75081)
|03-21-2014 12:19 PM|
Well I know that you would normally only soak the metal parts. However, everything I've read says you cannot take the power assembly out. So the carb is completely disassembled and ready for cleaning, but the plastic venture and the power assembly are still in and I'm not sure how to remove them. But thanks for the reply.
|03-21-2014 10:31 AM|
|vinniekq2||take the carb completely apart and clean metal parts only|
|03-21-2014 09:49 AM|
Re: Carb Cleaning
I'm disassembling a Ford 1100 carb for rebuild. I want to let it soak in carb cleaner for a couple of hours, but I'm not sure whether or not that would damage the power assembly. I'm not sure what rubber pieces are inside the power assembly but I've been told it shouldn't be removed. Will it be safe to soak the carb for a couple of hours with the power assembly?