|03-03-2004 01:11 AM|
|lluciano77||I don't know what pistons you are running, but I don't think there are too many flat top pistons out there that you would have to worry about clearances with only .500" lift. You could clay the pistons to be safe.|
|03-02-2004 10:16 PM|
valve clearance question
whats up guys do you think it is imperative that i check the valve clearance on this setup? comp cams 292 adv dur cam .501/.501 lift, 64 cc chamber heads, 10:1 flat tops with two valve reliefs and .025 deck height?