Hot Rod Forum banner

Old olds rear ends Front loader

1K views 1 reply 2 participants last post by  RADNOVASS 
#1 ·
Hello i have a chance to buy a old olds rear, with the round gear cover housing, and front loader,This is the one that was used in all the Gassers drag racing in the 60s,This is all ready set up to bolt in x frame impala. Is there still parts around for this diff.Or will anything interchange. Thank You Scott
 
#2 ·
i also have this rear diff, there are some parts still available i just put new wheel cylenders all new bearings and gears and spool.also , the only new gears are available are up to 488s ,i found a set of used 536's from rears and gears in NY. i need 556's so if you get a line on them please e-mail me @ radnovass@aol.com.hope i was helpful.GLENN

[ February 12, 2002: Message edited by: RADNOVASS ]</p>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top