|11-26-2005 02:26 PM|
Thanks for the advice Milo.
Best Regards. X
|11-25-2005 10:26 PM|
Some act a little better than others in the cold...
try pressing a thumb print into the paint on the masking or a safe place etc.
16 hours give or take to cut for a fast buff
30 days before it's gassed out for number plates stickers
90 days and more before a super buff/detail
|11-25-2005 05:40 PM|
Urethane based Paint Curing Time.
Hi guys, how long does it take Urethane based single stage to cure fully
typically in the 55 to 65 degree window.
Also would it be considered cured if I put some thinner on a rag and wipe
the paint lightly in a small spot and the " Paint did not dissolve on contact"
Any help is appreciated.