Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> Thinking about doing a paint job with a candy...Got some ?'s
User Name
Password
lost password?   |   register now

Thread: Thinking about doing a paint job with a candy...Got some ?'s Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
02-03-2006 08:21 PM
BondoKing The only reason you will sand the base is to remove dirt and nibs.. Base can not be sanded before top coating... There is a chemical adhesion with base and sanding it screws that up.
You are going to need test panels with your candy applications too... and you will also want ot over reduce the candy... this is not a 2 or 3 coat job either... if you can get it in 8 or 9 coats over reduced it will come out much nicer and less issues as far as stripping and blotching etc....

Covering a car in filler can be done by hand and 2 part glaze such as "Icing", but if you are going to do so, get a polyester primer.. it is the same thing only sprayable.. 2 or 3 coats should be enough to level out wavy panels...
and yes it will hold up to driving... It is not intended for smooth base, but to get the panels straight... Flat paint jobs come from flat panels, and that comes from many hours of sanding primers,fillers, and clear...

Here is a candy thread with 74 replys.. Candy Paint Info

Here is 1 thread on polyester primer.. Poly Primer

Just go to the search button after you are in the body/exterior section and type in these type words and you will find hours and hours of reading info...

Also read Martinsr Basics of Basics
02-03-2006 05:49 PM
memphisrain
Thinking about doing a paint job with a candy...Got some ?'s

I searched the site, but didn't have any luck finding answers to my questions.

I've seen some paint on a Big Dog chopper that I want to do for my own bike. However it is a candy color and I'm not sure of the process since it's been a while since I've painted and will be the first time with a candy color. So... I'm just thinking of the basic process. I was thinking of (after prime and prep) 3 coats base, wet sand, and then three coats base and then another round of sanding. Seems to be pretty typical of todays painters. But when I do the candy, I'm not sure how many coats to lay on. Also, from what I've seen/read the candy coat is more "misted" on there rather painted. Is this correct? Is there any sanding on the candy coats before the clear goes on?

Finally, on a lot of the T.V. shows I see a lot of the painters doing complete coats of filler on the cars to get a smooth base on the cars. This certainly can't be the best way to do it can it? It seems to me like at least it takes some of the craftsmanship away from the metal work. Either way, what type of product are they using? Seems its got to be a good product if you can't coat a whole car or bike with it and it stands up to the stress of driving/riding.


Thanks for any info you can pass my way!!
mR

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.