|03-28-2006 07:29 AM|
|BillyJoe||Thanks for the replies, I wasn't going to try to do it but was more curious how one would actually go about doing it. I suppose then that if the valve sizes are similar and chamber shape is same (hemisperical maybe) then it just boils down to the weird cam grind necessary.|
|03-27-2006 11:12 PM|
|03-27-2006 08:30 PM|
|airraptor||you would have to change the chamber shape, change valves to correct sizes, new cam, have 8 carbs or two 4 cylinder manifolds for intakes, and so on. not worth it unless lots of money to blow on trying stuff.|
|03-27-2006 03:02 PM|
Changing exhaust to intake and intake to exhaust?
I was watching a motorcycle show and someone had changed the carbs to the exhaust ports and the exhaust pipes to the intake ports. My question is, does this only involve installing a mirror image opposite grind on the cam or is there more involved? Thanks.