Hot Rod Forum banner

upgrading disc brakes

930 views 3 replies 2 participants last post by  CARGUY 
#1 ·
I have 1985 El Camino rolling chassis . that I bought today from a salvage yard. I am going to modify this frame to place another body on it that weights 4900lbs. I also have a 1985 full size GM car(Buick park ave) & was wondering if I can adapt the spindles & brakes to the mid size car, thus getting bigger ball joints & brakes........any help would be appreciated Don
 
#2 ·
i dont know if that will work i know hotchkis make an after market control arm for the el camino that allows using big camaro rotors and calipers on a caprice spindel

[ May 23, 2002: Message edited by: CARGUY ]</p>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top