|05-29-2006 07:21 PM|
|NAIRB||Sent you a PM. If you were a Jedi, you would have already known that.|
|05-29-2006 06:07 PM|
ever heard of an e-mail?
i am the jedi. i have the swortz. so give me some damn bait. lol. seriously i have just grazed over the top layer in the head pocket. it looks smooth every where even ported it. how is it that i can get that ultra smooth surface and with what do i do it?
i used a lil dremel and a small grinding wheeel smooth quick and even strokes almost shines but can fit the flapper in there to get all the surfaces? is it posible to get a cross-buffer at home depot or somewhere.or what else could i possibly use? finger sand with 300 grit?would that work? any other suggestions to get a nice finish? i beleive how it is will work but not sure i`m kinda iffy. i`d just like to get a seriously shiny surface, wha can i use?
|05-28-2006 07:37 PM|
I have a secret to polishing the chambers, but I would have to kill you if I told you what I do.
NAIRB CANNOT DEVULGE THE SECRETS OF PORTING IN PUBLIC
YOU MUST TURN FROM THE DARK SIDE AND BECOME A JEDI FIRST
|05-28-2006 04:16 PM|
|xntrik||I use tootsie rolls, polish everywhere, contour the hard lines. CCs are irrelavent.|
|05-26-2006 06:43 PM|
I used a dremel with the little sanding discs, then final polished with the dremel rubber polishing wheel thing - easy to get a mirror like finish.
(too much spare time )
|05-26-2006 01:46 PM|
|KNanthrup||whichever fits better and has the finer grit|
|05-26-2006 01:14 PM|
|johnsongrass1||Then keep the cc's.|
|05-26-2006 10:34 AM|
combustion chamber polishing????
do you have to use a flapper or a crossbuffer?? i`m really shoting the shait. if u know what i mean in the middle of a build and i`m kinda wanting to Squueze out all the juice i can.