|07-12-2006 08:15 AM|
|joe k||Never had any over heating issues,it was a sbc ,480 lift cam,11-1 compression,2 fours, in a Model A street rod.Ran about 190* and a little hotter if I idled it for a long time.|
|07-11-2006 11:24 AM|
|rlvirago||I was just wondering about the powder coating because someone told me it would keep the engine hotter and wouldn't let it cool properly. Joe, have you had any problems with this? Thanks.|
|07-11-2006 07:23 AM|
|joe k||I had my block and heads powder coated four years ago and it still looks great.Before I sent it out, I ground everything smooth,makes for a very nice job.|
|07-09-2006 08:12 PM|
I often wondered about powder coating the inside of the valley instead of Gyptal.....
Outside most are using etching primer and HT paint, or even DP90 and single urethane.
|07-09-2006 08:09 PM|
I was wondering if anyone ever powder coated the block and heads of their engine. Would this be ok to do or not a good idea? Thanks.