Hot Rod Forum banner

left side brakes wont work

736 views 1 reply 2 participants last post by  Joe456 
#1 ·
i rebuilt the master cylinder on a 57 chevy pickup and there is one line for left side brakes and one line for right side brakes. the left side brakes bleed out easily and hold very well but the right side bleed out but does not hold. i pulled the drums off the right side and the wheel cylinder does not push out when you apply the brake and there is corrosion under the wheel cylinder rubbers. could the wheel cylinder be froze up?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top