|11-07-2005 02:08 AM|
|xntrik||http://www.ridetech.com/ for Air Ride Technology company.|
|11-05-2005 10:49 AM|
|Simplicity||try www.alteredaltitude.com. Those guys do a lot of airride, and have great pic's on there site to help you!|
|04-02-2003 09:19 PM|
I just ordered my airbag Mustang II kit from Fatman Fabrications ($1999 with full Must II kit, brakes, arms, crossmember, rack, and bags). Heidts makes a full kit for a bit more (I think $2700), and they also make an upgrade kit if you already have a Must II front end, they sell a set of converted lower A-arms, bags, shocks, mounts, and an adapter for your upper A-arm to put the bag where your coil-over used to be for $650. If you are wanting to build your own set up, or buy a rear-end kit, go to <a href="http://WWW.JustAirBags.com." target="_blank">WWW.JustAirBags.com.</a> They sell triangulated 4-link kits for $459 with the bags included. They also sell individual components for the do-it-your-self'er. They are where I'm getting my compressor and valves from. Speedway Motors sells allot of the Mustang II front end pieces you will need if you're peice-ing one together. Zeg's also sells the conversion kit if you already have a Must II front end. I think their kit is in the $350-$400 range, though. I got most of my information out of this month's Street Rodder Magazine and Street Rod Builder.
|04-01-2003 01:22 PM|
|Dragon J||Saw no one responded spike so thought I'd give you a hit-Try <a href="http://www.classicperform.com" target="_blank">www.classicperform.com</a> but I think you have to install a MustangII kit first... There are many other places like Air Suspension Technologies also- good luck!|
|03-28-2003 05:34 PM|
Air Ride/ Air bags
Im looking for some places where i can be air ride/ air bag kits. my truck is 3/4 ton. Its a 1950 chevy. Im looking to put it on for show but i will be halling some stuff but not that heavy.
All Tips and Hits Are Greatly apperated
My 1950 chevy