|01-26-2007 03:16 PM|
|Bad Rat||worked for me.. from pepi's link,,,suggested the exactly same carbs that summit did,,,, it pops up from the carb pictures on the top rt corner where it says GO Bill|
|01-25-2007 06:40 PM|
Here's a link to the Holley page
I've seen the Holley online interactive carb selector, get to it here:
I find it a bit on the cautious side concerning the mechanical secondary models, but if were selling them I guess I would be too.
|01-25-2007 10:31 AM|
No, neither of them work.
I know from one of the other web sites that it is supposed to look like this but I don't see it or it doesn't load on my screen.
|01-25-2007 07:39 AM|
the first question it ask is for the cid look just to the right of the holley logo.
If you still have a problem try the link this way
|01-24-2007 11:30 PM|
|home brew||For some reason it doesn't show up on my page. Can you post the url for that page?|
|01-24-2007 07:32 PM|
|pepi||it is the holley one, the link is in the upper right hand corner ( the link is a graphic/icon). I all most missed it the first time I was looking . It is real simple to use and experiment with|
|01-24-2007 06:34 PM|
|home brew||No. Are you asking where it is? It has been repoerted on two different sites that Holley has it but if you go to Holley's site there is no way to find it. Perhaps it isn't working or not yet in operation.|
|01-24-2007 05:57 PM|
has you seen the interactive carburetor selector that is online.