|03-02-2007 05:47 PM|
Bottom of the page
While I was reading your question and the replies, on that same page at the bottom (scroll) was a list of similar threads that might help.
|02-25-2007 10:18 AM|
If you check your browser "history" of the pages you visited yesterday at HR.com you could look through them and see which posts you looked at. (it all depends on how you have your internet settings, if you don't keep a history,then you are SOL.)
That's how I do it when I can't remember where a page is that I didn't bookmark.
|02-25-2007 10:07 AM|
|02-25-2007 09:37 AM|
|joe k||With out seeing the post you're talking about I'm going to guess you're describing a panhard bar. Try Speedwaymotors.com part#916-45504 and see if thats what you're talking about.|
|02-25-2007 07:42 AM|
Thnx , I did the search before and read for an hour or so but couldn't find the same post I was at yesterday. Not yet anyways.
|02-25-2007 06:59 AM|
|Henry Highrise||Use the search function on this site...type in ladderbars or traction bars, whatever and see if you can find it. OK...I just did a search for ladder bars....click here to see what I got... scroll the whole page. http://www.hotrodders.com/forum/sear...earchid=890406|
|02-25-2007 06:17 AM|
Ladder bars or what ?
I was here someplace yesterday, The discussion was on ladder bars and a tube welded to the rear end. The welded tube was shaped like a hockey stick the blade end was welded to the rear end andthe other end was bolted to the frame which made a pivot point. There were pictures of someones project also.
Does anyone know or seen this info I am trying to discribe ?