|03-19-2007 07:34 AM|
|pal||thanks murff. looks like a good lead and i will call them.|
|03-18-2007 04:18 PM|
Try these guys - http://www.goodvibesracing.com/Produ...s/E-76-107.JPG - This image is a linkage kit for side saddle mounted but they have others.
|03-18-2007 03:28 PM|
tunnel ram linkage
i have brought this up before, but still not making progress. i have read a ton of good info on this site regarding tunnel ram set-ups, but very little detail to good linkage set-ups. i have 2-450cfm 4160 holleys set in-line on 1984 weind t-ram. i bought the mr. gasket progressive linkage set. first i feel the quality is poor at best. second it does not work properly or smoothly. if i continue to modify it so it will work i feel it will fail and or stick due to its poor design and quality. does anyone have pitcures they could share of there linkage set ups? i would like to see some pics of main throttle linkage to carb linkage as well. how about sources or sites that sell quality hardware to piece togather my own set? all the "good" quality kits i see are for side mount or blower set-ups. please help. thanks, pal