|07-31-2007 02:11 AM|
Welcome to the site. Lots of info and opinions here. To get the most out of the site check out the Knowledge Base and use the search function for quick answers to your questions. As well check out the Project Journals for info and inspiration.
Race ready Performance has electric cutouts that you can plumb into your existing systen:
Glad to have you here and enjoy the site.
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
|07-30-2007 10:10 PM|
This what your lookin for?
|07-30-2007 05:45 PM|
Google "pacbrake.com" and check out what they have. As I read it they offer a valve for diesel exhaust systems to meet EPA guide lines. I didn't read the entire page so I did not find a price but I think it is what you want.
|07-30-2007 04:49 PM|
Exhaust Selector Valve
I have a 67 Corvette that is an original drive train car. It is a small block with a power glide. My goal is to remove the existing small block and PG to preserve while I attempt to have some fun with the car.
The car was originally a rear exhaust car, but I have added a two inch side exhaust system. While I love the sound of the side exhaust, It is nearly impossible to carry on a conversation when driving at highway speeds.
I did retain the under car exhaust system and I am looking for a vendor that sells a 3 way valve that I can weld into the exhaust and select the side exhaust for cruising around town or the rear exhaust for highway trips.
Can anyone recommend a vendor who sells this type of selector valve?
Thanks in advance---Mark